Ultra SCSI Cable Assemblies 

The numbering system outlined below is used to identify product part numbers currently available for Standard SCSI cable assemblies.

click on the text for more information
[Sections can be accessed quickly by clicking on the text above.]
[For example clicking on Cable Gauge will take you to that section.]

 

   Cable Series

Number Type
210 .8mm VHDCI (die-cast shell) to .8mm (die-cast shell)
211 SCSI 68Pos Female (Molded) to .8mm (die-cast shell)
212 SCSI 68Pos Female (die-cast shell) to .8mm (die-cast shell)
213 SCSI 68Pos Male (Molded) to .8mm (die-cast shell)
214 SCSI 68Pos Male (die-cast shell) to .8mm (die-cast shell)

  Cable Gauge

External Cable Assemblies (1Gbit/s)

Length

Gauge (AWG)

Up to 10m

30
10m to 25m 28
   Cable Length

Cable lengths are measured in metres but are shown as a 3 or 4 figure number corresponding to centimetre units i.e.

100 = 1.0m
300 = 3.0m
1500 = 15.0m

Preferred lengths and configurations are available on request, however length limits are currently 1.0m (minimum length) and 25.0m (maximum).

   Ferrite

Cable assemblies with ferrites are suffixed with a -F.

NB. Ferrites cannot be used on assemblies shorter than 1.0m.

For Example :

A .8mm VHDCI (die-cast shell) to Male (Molded) SCSI cable  3m in length,  has the following part number :

213-30-300

Top